Multi-Pair, 7/0.20mm, 1 Pair, Screened, PVC

Part #: MCP1S500

7/0.20mm Tinned Copper Conductor, Polypropylene Insulated, Twinned, Cabled, Aluminium Laminate Screened, PVC Jacket, 1 Pair Security, Alarm and Communications Cable
  • Overview
  • Specifications
  • Downloads
  • Overview
The MCP range of RS-422 computer cables is polypropylene insulated and PVC sheathed. Overall screened versions carry and "S" suffix and individual and overall screened versions carry an "ISCS" suffix. This range of cables is designed for low bit rate data transmission up to 10 MB in an indoor or in-building environment. RS-422 was commonly used for extended data transmission up until the late 1990's. It was used to upgrade RS-232 systems and performed the same role, namely to interconnect DTE equipment such as printers, faxes, scanners and modems. Also referred to as EIA-422and ITU-T recommendation X.27, this type of connection was widely used in Apple computers until supersede by the USB interface in the 1998 iMac. The common connector used with this interface was the Sony 9 pin DE-9 connector. In recent times, RS-422 cables have migrated into the security market where they are used for door strikes, motion sensors, IR sensors, keypads and alarm module interconnection.
  • Specifications
General
Pack Size500m
Applicable StandardsAS/ACIF S008, UL758
Suitable ApplicationsUsed as signal transmission and connection of checking appliances of distribution system, computer system
ROHS CompliantYes
A-Tick (Yes/No)yes
No. Pairs1
Conductor Characteristics
AWG24
Stranding (mm)7/0.2
Area (mm2)0.22
Diameter (mm)0.6
MaterialTACW
Insulation
MaterialPP
Nominal Thickness (mm)0.28
Nominal OD (mm)1.2
Drain Wire
AWG24
Stranding7/0.2
Area (mm2)0.22
Diameter (mm)0.6
MaterialTACW
Screen
MaterialAl. Polyester Tape
Coverage (%)1
Outer Sheath
MaterialPVC
ColourBLACK
Nominal Thickness (mm)0.8
Nominal OD (mm)4.4
Physical Characteristics
Insulation - Elongation at BBA>150%
Outer Sheath - Elongation at BBA>100%
Tensile Strength Before Aging>12MPa
Electrical Properties
Max. Conductor DC Resistance @ 20°C95.3Ω/km
Min. Insulation Resistance @ 20°C1,000MΩ.km
Voltage Test: Conductor to core1.5 kV ac/1min
Voltage Test: Core to sheath3.0 kV ac/1min
Mechanical Properties
Operating Temp Range-15 to 70°C
Max. Recommended Pulling Tension30N
Min Bend Radius (Install)44mm
Approximate Mass(kgs/100m)2.37kg/100m
Supply Information
Supply Information - Pack TypeWooden Reel
DimensionsW28 x H21.8cm
  • Downloads