Multi-Pair, 7/0.40mm, 1 Pair, Screened, PVC

Part #: MCP7041S500

7/0.40mm Bare Copper Conductor, PVC Insulated, Twinned, Cabled, Aluminium Laminate Screened, PVC Jacketed, 1 Pair Instrumentation, Control, Alarm and Security Cable
  • Overview
  • Specifications
  • Downloads
  • Overview
The MCP704 range is a larger version of the standard MCP703 products. With a nominal conductor area of 0.88 mm2 these cables offer extended distance capability without the expense of the traditional 1mm2 conductor size. Used in the industrial segment for instrumentation and control. Typical applications include connection of devices to PLC's (Programmable Logic Controllers), air-conditioning controllers, thermostats an refrigeration units. These cables can also be used for factory automation systems including interconnection of proximity sensors, reed switches, IR sensors, overcurrent detectors and control signals for DC or AC motor drives. Being PVC insulated and PVC jacketed, these cables are ideal for the indoor or factory environment. Overall screened versions ("S" suffix") provide moderate screening of electrical interference. For higher screening performance, the individual and collective screened version ("ISCS" Suffix) is available. For areas where there is risk of physical damage, steel wire armoured versions ("SWA" Suffix) can be considered. Red coloured jacket versions of these cables also find their way into fire alarm system use.
  • Specifications
General
Pack Size500m
Applicable StandardsAS/ACIF S008
Suitable ApplicationsFor low voltage device connection. Not Suitable for mains connection.
ROHS CompliantYes
A-Tick (Yes/No)Yes
No. Pairs1
Conductor Characteristics
AWG18
Stranding (mm)7/0.4
Area (mm2)0.88
Diameter (mm)1.2
MaterialPACW
Insulation
MaterialPVC
Nominal Thickness (mm)0.3
Nominal OD (mm)1.85
Drain Wire
AWG22
Stranding7/0.25
Area (mm2)0.343
Diameter (mm)0.75
MaterialTACW
Screen
MaterialAl. Polyester Tape
Coverage (%)1
Outer Sheath
MaterialV-90 HT PVC
ColourBLACK
Nominal Thickness (mm)0.8
Nominal OD (mm)5.5
Physical Characteristics
Insulation - Elongation at BBA>100%
Outer Sheath - Elongation at BBA>100%
Tensile Strength Before Aging>12MPa
Electrical Properties
Max. Conductor DC Resistance @ 20°C22.2Ω/km
Min. Insulation Resistance @ 20°C1000MΩ.km
Voltage Test: Conductor to core1.5 kV ac/1min
Voltage Test: Core to sheath3.0 kV ac/1min
Mechanical Properties
Operating Temp Range-15 to 90°C
Max. Recommended Pulling Tension123N
Min Bend Radius (Install)62mm
Approximate Mass(kgs/100m)4.51kg/100m
Supply Information
Supply Information - Pack TypeWooden Reel
DimensionsW36 x H21.8cm
  • Downloads