Multi-Pair, 7/0.50mm, 6 Pair, Screened, PVC

Part #: MCP7056S1000

7/0.50mm Bare Copper Conductor, PVC Insulated, Twinned, Cabled, Aluminium Laminate Screened, PVC Jacketed, 6 Pair Instrumentation, Control, Alarm and Security Cable
  • Overview
  • Specifications
  • Downloads
  • Overview
MCP705 products use a standard 7/0.50 mm conductor providing a nominal 1.5mm2 conductor area. This is the "big-brother" of the MCP703 range. Used in the industrial segment for instrumentation and control. Typical applications include connection of devices to PLC's (Programmable Logic Controllers), air-conditioning controllers, thermostats an refrigeration units. These cables can also be used for factory automation systems including interconnection of proximity sensors, reed switches, IR sensors, overcurrent detectors and control signals for DC or AC motor drives. Being PVC insulated and PVC jacketed, these cables are ideal for the indoor or factory environment. Overall screened versions ("S" suffix") provide moderate screening of electrical interference. For higher screening performance, the individual and collective screened version ("ISCS" Suffix) is available. For areas where there is risk of physical damage, steel wire armoured versions ("SWA" Suffix) can be considered. MCP705 products are typically used in longer distance or higher current applications when compared to the MCP703 series. Red coloured jacket versions of these cables also find their way into fire alarm system use.
  • Specifications
General
Pack Size1000m
Applicable StandardsAS/NZS 1125 , AS/NZS 3808 , IEC60332-1
Suitable ApplicationsUsed to carry voice and data services, they also serve as the interconnection between electrical equipment and instruments.
ROHS CompliantYes
No. Pairs6
Conductor Characteristics
AWG16
Stranding (mm)7/0.50
Area (mm2)1.5
Diameter (mm)1.5
MaterialBC
Insulation
MaterialPVC
Nominal Thickness (mm)0.32
Nominal OD (mm)2.2
Drain Wire
AWG22
Stranding7
Area (mm2)0.343
Diameter (mm)0.25
MaterialTC
Screen
MaterialAl. Polyester Tape
Coverage (%)1
Outer Sheath
MaterialPVC
ColourBLACK
Nominal Thickness (mm)1.15
Nominal OD (mm)12.8
Physical Characteristics
Insulation - Elongation at BBA>100%
Outer Sheath - Elongation at BBA>100%
Tensile Strength Before Aging>12MPa
Electrical Properties
Voltage Rating110a.c/150d.c
Max. Conductor DC Resistance @ 20°C13.6Ω/km
Max. Pair-pair capacitance unbalance110pF/m
Nom. Characteristic Impedance @ 1MHz280ohm
Voltage Test: Conductor to core2.0 kV ac/1min
Mechanical Properties
Operating Temp Range-15 to 90°C
Max. Recommended Pulling Tension994N
Min Bend Radius (Install)128mm
Approximate Mass(kgs/100m)27.7kg/100m
Supply Information
Supply Information - Pack TypeWooden Reel
DimensionsW85 x H60cm
  • Downloads