LAN, 23 AWG Stranded, 4 Pair, Cat6 UTP Patch, PE/PVC – Yellow

Part #: UTPL6YE305RB

23 AWG Stranded Bare Copper Conductor, Polyethylene Insulated, Twinned, Cabled, PVC Jacketed, 4 pair Category 6 UTP Cable
  • Overview
  • Specifications
  • Downloads
  • Overview
Category cables are designed to carry high bit rate signals in LAN (Local Area Network) based systems using Ethernet protocols defined by IEEE. Originally designed to operate at 1 MB these systems have evolved over time to the point where they are now able to communicate at bit rates of 1000 MB (also called Gigabit-Ethernet) and above. Category cables are often employed in a STAR network topology. Such cabling is often referred to as Structured Cabling or Structured Wiring and involves using fixed solid conductor cable in horizontal runs radiating from a central MDF to workstation outlets. Category patch cable that has stranded conductors is then used for the last 5 metres of the run to connect the work outlet to the computer or workstation. Standards such as AS/NZS 3080, ISO 11801 and EIA/TIA 568 specify the requirements for the cable and the subsequent channel or link. Typical protocols include 1Base5 (IEEE 802.3e), 10Base-T (IEEE 802.3i), 100Base-TX (IEEE 802.3u) and 1000Base-T (IEEE 802.3ab). Garland category cable is designed to meet or exceed the necessary standards with many of the products being third part verified for performance by UL or ETL. Category 5E horizontal cables carry the UTPL5E insignia and are available in PVC (standard indoor), Halogen Free ("HF" suffix) and Jelly Filled versions ("JF" suffix) for outdoor and underground installations. Category 6 cables carry the UTPL6 insignia and are also available in the same options. Stranded versions ("MTP" suffix) are available in PVC or halogen free jacket options only.
  • Specifications
General
Pack Size305m
Applicable StandardsAS/ACIF S008, UL444, TIA/EIA 568 C.2
Suitable ApplicationsFor communication network applications needing up to gigabit networking speeds.
ROHS CompliantYes
A-Tick (Yes/No)yes
No. Pairs4
Conductor Characteristics
AWG23
Stranding (mm)1/0.57
Area (mm2)0.255
Diameter (mm)0.57
MaterialBC
Insulation
MaterialPE
Nominal Thickness (mm)0.22
Nominal OD (mm)1.025
Filler
MaterialCross–web Separator , Rip Cord
Outer Sheath
MaterialPVC
ColourYellow
Nominal Thickness (mm)0.58
Nominal OD (mm)6.2
Physical Characteristics
Insulation - Elongation at BBA>300%
Outer Sheath - Elongation at BBA>100%
Tensile Strength Before Aging>13.8MPa
Electrical Properties
Max. Conductor DC Resistance @ 20°C86Ω/km
Max. Mutual Capacitance @ 1KHz56 pF/m
Max. Pair-pair capacitance unbalance330 pF/100m
Nom. Characteristic Impedance @ 1MHz100±15Ω
Voltage Test: Conductor to core1.5 kV ac/1min
Voltage Test: Core to sheath3.0 kV ac/1mi
Mechanical Properties
Operating Temp Range-15 to 70°C
Max. Recommended Pulling Tension142N
Min Bend Radius (Install)62mm
Approximate Mass(kgs/100m)4.64kg/100m
Supply Information
Supply Information - Pack TypePlastic Reel
DimensionsW36 x 26.6cm
  • Downloads