- Overview
- Specifications
- Downloads
- Overview
The MCP range of RS-422 computer cables is polypropylene insulated and PVC sheathed. Overall screened versions carry and "S" suffix and individual and overall screened versions carry an "ISCS" suffix. This range of cables is designed for low bit rate data transmission up to 10 MB in an indoor or in-building environment. RS-422 was commonly used for extended data transmission up until the late 1990's. It was used to upgrade RS-232 systems and performed the same role, namely to interconnect DTE equipment such as printers, faxes, scanners and modems. Also referred to as EIA-422and ITU-T recommendation X.27, this type of connection was widely used in Apple computers until supersede by the USB interface in the 1998 iMac. The common connector used with this interface was the Sony 9 pin DE-9 connector. In recent times, RS-422 cables have migrated into the security market where they are used for door strikes, motion sensors, IR sensors, keypads and alarm module interconnection.
- Specifications
| General | |
| Pack Size | 500m |
| Applicable Standards | AS/ACIF S008, UL758 |
| Suitable Applications | Used as signal transmission and connection of checking appliances of distribution system, computer system |
| ROHS Compliant | Yes |
| A-Tick (Yes/No) | yes |
| No. Pairs | 1 |
| Conductor Characteristics | |
| AWG | 24 |
| Stranding (mm) | 7/0.2 |
| Area (mm2) | 0.22 |
| Diameter (mm) | 0.6 |
| Material | TACW |
| Insulation | |
| Material | PP |
| Nominal Thickness (mm) | 0.28 |
| Nominal OD (mm) | 1.2 |
| Drain Wire | |
| AWG | 24 |
| Stranding | 7/0.2 |
| Area (mm2) | 0.22 |
| Diameter (mm) | 0.6 |
| Material | TACW |
| Screen | |
| Material | Al. Polyester Tape |
| Coverage (%) | 1 |
| Outer Sheath | |
| Material | PVC |
| Colour | BLACK |
| Nominal Thickness (mm) | 0.8 |
| Nominal OD (mm) | 4.4 |
| Physical Characteristics | |
| Insulation - Elongation at BBA | >150% |
| Outer Sheath - Elongation at BBA | >100% |
| Tensile Strength Before Aging | >12MPa |
| Electrical Properties | |
| Max. Conductor DC Resistance @ 20°C | 95.3Ω/km |
| Min. Insulation Resistance @ 20°C | 1,000MΩ.km |
| Voltage Test: Conductor to core | 1.5 kV ac/1min |
| Voltage Test: Core to sheath | 3.0 kV ac/1min |
| Mechanical Properties | |
| Operating Temp Range | -15 to 70°C |
| Max. Recommended Pulling Tension | 30N |
| Min Bend Radius (Install) | 44mm |
| Approximate Mass(kgs/100m) | 2.37kg/100m |
| Supply Information | |
| Supply Information - Pack Type | Wooden Reel |
| Dimensions | W28 x H21.8cm |
- Downloads
