Multi-Pair, 7/0.50mm, 1 Pair, Screened, PVC/SWA/PVC

Part #: MCP7051SSWABL500

7/0.50mm Bare Copper Conductor, PVC Insulated, Twinned, Aluminium Laminate Screened, PVC Bedded, Steel Wire Armoured, PVC Jacketed, 1 Pair Instrumentation, Control, Alarm and Security Cable
  • Overview
  • Specifications
  • Downloads
  • Overview
MCP705 products use a standard 7/0.50 mm conductor providing a nominal 1.5mm2 conductor area. This is the "big-brother" of the MCP703 range. Used in the industrial segment for instrumentation and control. Typical applications include connection of devices to PLC's (Programmable Logic Controllers), air-conditioning controllers, thermostats an refrigeration units. These cables can also be used for factory automation systems including interconnection of proximity sensors, reed switches, IR sensors, overcurrent detectors and control signals for DC or AC motor drives. Being PVC insulated and PVC jacketed, these cables are ideal for the indoor or factory environment. Overall screened versions ("S" suffix") provide moderate screening of electrical interference. For higher screening performance, the individual and collective screened version ("ISCS" Suffix) is available. For areas where there is risk of physical damage, steel wire armoured versions ("SWA" Suffix) can be considered. MCP705 products are typically used in longer distance or higher current applications when compared to the MCP703 series. Red coloured jacket versions of these cables also find their way into fire alarm system use.
  • Specifications
General
Pack Size500m
Applicable StandardsAS/NZS 1125, AS/NZS 3808
Suitable ApplicationsUsed to carry voice and data services, they also serve as the interconnection between electrical equipment and instruments.
ROHS CompliantYes
No. Pairs1
ArmouredSWA
Conductor Characteristics
AWG16
Stranding (mm)7/0.5
Area (mm2)1.5
Diameter (mm)1.5
MaterialPACW
Insulation
MaterialV-90HT PVC
Nominal Thickness (mm)0.32
Nominal OD (mm)2.2
Drain Wire
AWG22
Stranding7/0.25
Area (mm2)0.343
Diameter (mm)0.76
MaterialTACW
Screen
MaterialAl. Polyester Tape
Coverage (%)1
Bedding
Material5V-90 PVC
ColourBLACK
Nominal Thickness0.75
Nominal OD6.1
Outer Sheath
Material5V-90 PVC
ColourBLACK
Nominal Thickness (mm)1.4
Nominal OD (mm)10.7
Physical Characteristics
Insulation - Elongation at BBA>100%
Outer Sheath - Elongation at BBA>100%
Tensile Strength Before Aging>12MPa
Electrical Properties
Voltage Rating110a.c.150d.c
Max. Conductor DC Resistance @ 20°C13.6Ω/km
Max. Mutual Capacitance @ 1KHz110pF/m
Nom. Characteristic Impedance @ 1MHz280ohm
Mechanical Properties
Operating Temp Range-15 to 90°C
Max. Recommended Pulling Tension1819N
Min Bend Radius (Install)130mm
Approximate Mass(kgs/100m)23.74kg/100m
Supply Information
Supply Information - Pack TypeWooden Reel
DimensionsW58 x H46cm
  • Downloads